标签：技术开发合同,技术咨询合同,http://www.qiuzhi56.com 国际技术转让加设备进口合同,http://www.qiuzhi56.com
"cut-off date" means the first dayfollowingthelapseof_________years from the signing date of the agreement.
"processlicensor"means_________whohasauthorizedthesupplier to grant licences to the buyer pursuant to article 16（licence/use of technical information）of the agreement and this appendix6.
other words and expressions shall have the meanings ascribedtothemin article 1 （definitions）of the agreement.
2.licensing conditions
the supplier shall， save as hereinafter provided， grant to the buyer anon-exclusive， non-transferable right and licence， withouttherighttosub-license， under the patent rights and the process information:
（1）to use process a in the process a unit， and
（2）to use and sell the products produced by the processaunit[incountry （ies)]/[inanycountryoftheworldexceptthecountryorcountries set out below:]
3.paid up licence and additional licence fees
the paid up licence fees payablepursuanttoarticle12（contractprice and technical service fee）of the agreement andtheappendicestothe agreement apply to the process a unit operating at itsstateddesigncapacity. if the design capacity is in any way increased or if the processa unit is in any way operated in excess of its designcapacitythenthebuyer shall pay to the supplieradditionallicencefeescalculatedinaccordance with the following formula:（calculation formula)
4.improvements and grant-back
4.1subject to paragraph 3 above， and wheredulyauthorizedbytheprocess licensor， the supplier shall:
（1）from time to time， and to the extent that the supplier is entitledto disclosethesame，providethebuyerwithtechnicalinformationrelating to improvements in process a， whetherornotpatentable，madeavailable to the supplier by the process licensor to the extent thatsuchinformation is useful for the operation of the process a unit; and
（2）grant to the buyer a licence mentioned in （1）aboveinthesameterms as contained in paragraph 2 above.
such licence shall where permitted by the processlicensor，bemadeavailable without additionalpayment，unlessandtotheextentthatparagraph 3 above applies. the supplier's obligation under thisparagraphshall terminate on the cut-off date.
4.2the buyer shall:
（1）from time to time provide the supplier with technicalinformationrelating to any inventions， improvements and/or developments madebythebuyer in connection with thedesign，operationormaintenanceoftheprocess a unit;
（2）granttothesuppliertheroyalty-free，non-exclusive（non-transferable）right and licence to use the technical information disclosedunder paragraph 4.2 （1）in process a， and to practice any patentsgrantedin respect of any such information in process a， and to use andselltheproducts produced by process a. the saidrightsandlicencesshallbeextended to the process licensor and the licensees of the process licensorand of the supplier for use in process a. thebuyer'sobligationsunderthis paragraph shall terminate on the cut-off date.
5.patent indemnity
notwithstanding article 29 （patent indemnity）and subjecttoarticle30 （limitation of liability）of the agreement the supplier's liability forindemnification pursuant to article 29 （patent indemnity）of the agreementarising in connection with the licence hereby granted shall be limitedto_________ per cent of the paid up licence fee specified in the appendix 1（breakdown of contract price）to the agreement. thesupplier'sliabilityfor indemnification under this paragraph shall terminateonthecut-offdate.
the buyer shall be responsible for andpayanydamages，claimsordemands （including legal and otherprofessionalfeesandexpenses） inexcess of the limit specified above.
6.special conditions for termination
6.1if the contract is terminated by eitherparty，thenunlesstheparties agree otherwise， the rights and obligations of the buyerandthesupplier in respect of licences for process agrantedpursuanttothisappendix 6 shall be terminated， except thoseprovidedinparagraph6.2below.
6.2notwithstanding the provision of paragraph 6.1 above， in the eventthat the contract isterminatedbythebuyerduetothesupplier'sdefault， the buyer shallhavetherighttorequestthesuppliertocontinue to grantthelicenceshereunderandtosupplytheprocessinformation. in such event， the supplier shalldoorhavetheprocesslicensor so grant licences and supply the process information either i）byan assignment or novation of the agreement（s）for licences and the processinformationbetweentheprocesslicensorandthesupplier，ii） byarranging an agreement for the licences and the process information tobeconcluded directly between the process licensor and the buyer oriii） byan agreement to be concluded between the buyer and the supplier separatelyfrom the contract.
6.3on the occasion of the terminationofthecontract，exceptincases where the licences will be continued tobegrantedinaccordancewith paragraphs 6.1 and 6.2 above:
（1）all rights and licences granted hereunder shall terminate;
（2）all the process information provided by the supplier to thebuyerand all copies thereof shall be returned to the supplier forthwith;
（3）the basic design fee shall be payable on a pro rata for thebasicdesign work performed up to the date of termination of the contract，suchcalculation being based on a fee of _________ for completionofthebasicdesign work for the process a unit;
（4）if the basic design for the process a unit （whether preliminary orfinal）has been submitted to the buyer prior to the date of termination ofthe contract， the supplier shall be entitled to receive _________ percentof the paid up licence fee from the buyer. the buyer shall pay theunpaidbalance， or， as the case may be， the supplier shall refund the excess paidby the buyer within 60 days of the date of termination of the contract;
（5）if no basic design for the process a unit hasbeensubmittedtothe buyer prior to the date of termination of the contract，thesuppliershall refund to the buyer any paid up licence fee paid by the buyer to thesupplier as at the date of termination of the contract， and
（6）the buyer's obligation under paragraph 8 below shallsurviveanytermination of the contract.
6.4if， in the twelve months following the date of termination ofthecontract， the buyer concludes a licence agreement either with the supplieror the process licensor in respect of any process（es） herebylicensed，any sum paid by the buyer as paid up licence fee under paragraph6.3（4)above shall be credited to any licence fees due under such agreement.
7.trade mark licence conditions
8.secrecy obligation conditions
appendix 7-1scope of works and supply
1.scope of works and supply （sketch)
item:_________
contents:_________
supplier's scope:_________
buyer's scopep:_________
remarks:_________
2.list of equipment
the equipment to be provided by the supplier in accordance witharticle 8.1 （scope of works）of the agreement shall be as follows:
3.list of technical documents
the technical documents to be provided by the supplier in accordancewith article 8.4 of the agreement shall be as follows:
4.training of buyer's engineers
the training of the buyer's engineers referred to in article 8.6 ofthe agreement shall be conducted in accordance with the followingconditions:
training of buyer's engineers

上一页  [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32]  下一页

，国际技术转让加设备进口合同